Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AIR-AP1220B Series - Boot Fail

I have the above system and when it boots the lights are as follows, top - off, middle - Solid RED, Bottom - Solid Yellow.

If I attach a console cable and power on i get the following

Testing DRAM...

(press <esc> to bypass)

***> DRAM Error!

00000104: 00000000 -> E0330832

00000108: 00000000 -> FFFFFFFF

00000104: FFFFFFFF -> E0330832

00000104: 00000000 -> E0330832

00000108: 00000000 -> FFFFFFFF

I have another unit with ALL lights on Solid Yellow, and with no console info.

Are the units beyond repair.

1 REPLY
Silver

Re: AIR-AP1220B Series - Boot Fail

This might indicate a corrupt image. Reset the access point and try again. If this doesnt work you can reload the IOS image using CLI section in the following URL http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43trb.html#wp1038660

153
Views
0
Helpful
1
Replies
CreatePlease to create content