AIR-CAP-1602i-a-k9 on the WAN does not join WLC 2504 ON CENTRAL Location
Hello everybody, I have an issue with all AIR-CAP-1602i-a-k9 on the remote site, because the appear just for a second on GUI WLC as OPERATION STATUS= UNKOWN as you can see on the attachements besides the software versio of the WLC 2504.
The AP reported with AP NAME: APe4c7.22b2.dc29 is the one I´m using for troubleshoting and the another AP NAME: bamanwlap00n1, as you can see both AP OPERATIONAL STATUS: UNKOWN. The version of WLC 2504 is 220.127.116.11 as can see.
I configured staticlly the AP APe4c7.22b2.dc29, with the L3 and given the IP Address of the WLC IP: 172.20.12.12
I can ping from the console AP to WLC, but the AP keep doing trying to registered without sucess over and over, I attached as well.
I´m not speciallist in Wireless, that´s the reason I decide to write you guys, if somebody can help, IT WILL VERY HELPFULL.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...