Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AIR-CAP1602I-T-K9

Hello.

 

Can I convert a AIR-CAP1602I-T-K9 from controller-based to stand-alone???

 

Thank you.

5 REPLIES

OF course you can.Here's the

OF course you can.

Here's the link of the stand-alone image.

 

http://software.cisco.com/download/release.html?mdfid=284366503&flowid=37523&softwareid=284180979&release=15.2.4-JB5&relind=AVAILABLE&rellifecycle=ED&reltype=latest

 

do you know how to convert it?

Community Member

No, please help me.

No, please help me.

Sure no problem. First you

Sure no problem.

 

First you need to download the correct image. You can do it in the previous link.

Console tu AP and write this command: debug capwap console cli. Whit this line you you capwap ap will accept the command conf t

then:

conf t

ip default-gateway X.X.X.X

(I recommend that your computer's ip and the default gateway be the same.)

interface g0

ip address X.X.X.X  x.x.x.x <-- Your subnet mask

no shut

archive download-sw /force-reload /overwrite tftp://X.X.X.X/c1140-k9w7-tar.124-25d.JA.tar

TFTP X.X.X.X = Your ip computer 

c1140-k9w7-tar.124-25d.JA.tar= you need to change it for the correct name.

Your computer and your AP have to be in the same network

 

Example:

My computer address: 10.10.10.1

conf t


ip default-gateway 10.10.10.1


int g0


ip address 10.10.10.102 255.255.255.0


no sh

archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1140-k9w7-tar.124-25d.JA.tar

 

 

Community Member

Thank you d.ordonez. I will

Thank you d.ordonez.

 

I will go to try to do this conversion.

 

Thank you for help me.

You're welcome.***Please rate

You're welcome.

***Please rate the answer if this information was useful***

957
Views
14
Helpful
5
Replies
CreatePlease to create content