Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AIR-CAP3602E-E-K9 can not download autonomous IOS image ?!

Hi all.

AIR-CAP3602E can not connect to tftp after format flash. Flash has been erased to free space for autonomous IOS.

When I reset it using mode button , I've got this on the console screen :

IOS Bootloader - Starting system.

flash is writable

FLASH CHIP: Macronix Mirrorbit (00C2)

Xmodem file system is available.

flashfs[0]: 1 files, 1 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31997952

flashfs[0]: Bytes used: 1536

flashfs[0]: Bytes available: 31996416

flashfs[0]: flashfs fsck took 11 seconds.

Reading cookie from SEEPROM

Base Ethernet MAC address: 7c:ad:74:xx:xx:xx

Ethernet speed is 100 Mb - FULL Duplex

Mode button pressed.

Mode button held for at least 20 seconds.

process_config_recovery: set IP address and config to default 10.0.0.1

process_config_recovery: image recovery

image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default

examining image...

DPAA Set for Independent Mode

DPAA_INIT = 0x0

%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed out)

issuing command arp I see only this

ap: arp

     255.255.255.255 ff:ff:ff:ff:ff:ff 0 25

configuring it manually :

ap: set

    DEFAULT_ROUTER=10.0.0.1

    IP_ADDR=10.0.0.1

    NETMASK=255.255.255.224

ap: ether_init

    Initializing ethernet port 0...

    Ethernet speed is 100 Mb - FULL Duplex

ap: tftp_init

ap: flash_init

     Initializing Flash...

     ...The flash is already initialized.

ap: tar -xtract tftp://10.0.0.2/ap3g2-k9w7-tar.default Flash:

and I've got this:

extracting info (285 bytes)Flash:/info: permission denied

Then I tried arp again

ap: arp

     255.255.255.255 ff:ff:ff:ff:ff:ff 0 299

           10.0.0.2 00:1f:c6:xx:xx:xx 0 299

ap:

This is the TFTP log:

===============================================

TFTP log

Connection received from 10.0.0.1 on port 1025 [01/02 19:18:03.631]

Read request for file <ap3g2-k9w7-tar.default>. Mode octet [01/02 19:18:03.631]

Using local port 52999 [01/02 19:18:03.633]

TIMEOUT waiting for Ack block #1 [01/02 19:18:18.647]

===============================================

Tftp timeout  is set to 30 s

Thanks in advance for any help

1 REPLY
Hall of Fame Super Silver

Re: AIR-CAP3602E-E-K9 can not download autonomous IOS image ?!

What TFTP server are you using? Try either 3CDeamon or TFTPd32. Also make sure the MD5 has matches for the image you download. This will verify the image is indeed good.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
927
Views
0
Helpful
1
Replies
CreatePlease to create content