Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-CAP3602I-E-K9 without MAC at SNMP reply

Hi,

we habe a "funny" AIR-CAP3602I-E-K9 for which we need to read out the MAC via SNMP query.

This one and only specimen doesn't return it's MAC. Both ethernet MAC and Base Radio MAC are available In wism2.

Any suggestions on how to overcome the problem?

SW version:

Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(2)JB1, RELEASE SOFTWARE (fc1)

BOOTLDR: C3600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(23c)JY, RELEASE SOFTWARE (fc1)

cisco AIR-CAP3602I-E-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.

PowerPC CPU at 800Mhz, revision number 0x2151

LWAPP image version 7.4.100.60

SNMP Query: snmpwalk -v 2c -c <pswd> <wism-ip> 1.3.6.1.4.1.9.9.513.1.1.1.1.2

SNMP Reply:

...

iso.3.6.1.4.1.9.9.513.1.1.1.1.2.32.58.7.73.114.112 = Hex-STRING: 60 73 5C AA 09 D5

iso.3.6.1.4.1.9.9.513.1.1.1.1.2.80.6.4.111.202.32 = STRING: "LN5`SR"   <----- this is the offender

iso.3.6.1.4.1.9.9.513.1.1.1.1.2.80.6.4.187.125.176 = Hex-STRING: 4C 4E 35 C7 1E 25

iso.3.6.1.4.1.9.9.513.1.1.1.1.2.88.151.30.178.178.128 = Hex-STRING: 6C 20 56 E6 9C B9

iso.3.6.1.4.1.9.9.513.1.1.1.1.2.88.191.234.1.112.192 = Hex-STRING: 58 BF EA 01 70 DC

...

Thanx in advance, KaTeRiNa

433
Views
0
Helpful
0
Replies