Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-CT5760 and ISE as admin authentication server

HEllo

i am trying to setup ISE 1.2 to be radius authentication server for our WLC admins; we have thsi setup for older WLCs no problem but with this new WLC it just not working. Any good document i can follw to setup admin access via radius ISE 1.2?

 

thanks

 

 

4 REPLIES
VIP Purple

Hi If you are trying to

Hi 

If you are trying to control GUI access of these controller (https://x.x.x.x/wireless) via RADIUS, I do not think you can do this.

Since those are IOS based devices, you can restrict CLI access using privilege levels, but not WLC GUI access using RADIUS attributes.

 

HTH

Rasika

**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****

New Member

Hi Rasikaif this is a IOS

Hi Rasika

if this is a IOS device then i should at least be able to use AAA commands to restrict/provide access to admin users - right now if i ssh into cli i can type anything as un/pw (like afdfdsfsdf/fdfdfasd) and i got in into enable mode.

I have routers/switches/asa i configured for AAA no problem. Is behavior of this CT5760 as same as with other Cisco ios devices?

 

New Member

Hi Any ideas? Thanks  

Hi 

Any ideas?

 

Thanks

 

 

Please refer to the link-http

Please refer to the link-

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_admin.html

79
Views
0
Helpful
4
Replies