Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AIR-LAP1131AG-N-K9 configuring

Could someone please tell me how to get into an AIR-LAP1131AG-N-K9 for the first time? I do not know the IP Address for it (IF it is 10.0.0.1 it is not working)

I have a small notebook PC unfortunately only with female serial port, and 2 Macbooks with no COM ports, so have to use ethernet cable to set up a console link if this is possible?

Could someone please give me instructions on how to set up the IOS on the AP so I can use it to link up with a AIR-BR1310G-E-K9 and AIR-ANT2506 I have?

Thanks, Ian

1 REPLY
Hall of Fame Super Gold

Re: AIR-LAP1131AG-N-K9 configuring

Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our useful posts.  Thanks.

4605
Views
0
Helpful
1
Replies
CreatePlease to create content