Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

AIR-LAP1131G not connecting to WLC4402-12

Hi

I am trying to configure the ATR-LAP1131G to WLC4402-12, i am getting invalid regularity domain and country code, LAP is new one , for WLC4402-12 already 10 APs are configured and connected. they are working fine. but when i am trying to connect the LAP1131G .i am getting these messages in the controler and AP

Jan 13 16:53:26.201 1x_auth_pae.c:2470 DOT1X-1-MAX_EAP_IE_RETRIES_REACHED: Reached Max EAP-Identity Request retries (21)
for STA00:1c:b3:7a:d6:da
Jan 13 16:53:22.703: [ERROR] spam_lrad.c 1891: AP 00:21:a0:f8:dc:00 not allowed to join. Regulatory Domain check complet
ely FAILED.
           Allowed: (802.11bg:-AN    802.11a:-N)
Jan 13 16:53:22.703: Previous message occurred 3 times.
Jan 13 16:53:22.703: [ERROR] spam_lrad.c 6715: AP 00:21:a0:f8:dc:00: Invalid country code ().
Jan 13 16:53:14.477: [ERROR] spam_lrad.c 1891: AP 00:21:a0:e3:c6:30 not allowed to join. Regulatory Domain check complet
ely FAILED.
           Allowed: (802.11bg:-AN    802.11a:-N)

AP error message

*Mar  1 00:00:05.398: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar  1 00:00:06.798: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar  1 00:00:07.936: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 10-Aug-07 20:44 by kehsiao
*Mar  1 00:00:07.936: %SNMP-5-COLDSTART: SNMP agent on host AP0023.04b7.8880 is undergoing a cold start
*Mar  1 00:00:07.955: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar  1 00:00:08.826: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar  1 00:00:08.955: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:00:09.826: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar  1 00:00:26.953: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar  1 00:00:26.953: bsnInitRcbSlot: slot 1 has NO radio
*Mar  1 00:00:26.971: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
*Mar  1 00:00:29.421: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar  1 00:00:29.459: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar  1 00:00:30.422: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
Translating "CISCO-LWAPP-CONTROLLER.technicolor.com"...domain server (10.17.36.22)
*Mar  1 00:00:36.294: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.17.36.214, mask 255.255.255.0, hostname AP0023.04b7.8880


*Mar  1 00:00:38.433: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.technicolor.com
*Mar  1 00:00:48.441: LWAPP_CLIENT_ERROR_DEBUG: spamHandleDiscoveryTimer : Found the discovery response from MASTER Mwar

*Mar  1 00:00:48.452: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar  1 00:00:48.453: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar  1 00:00:49.453: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 13 12:58:41.283: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Dec 13 12:58:46.283: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response

*Dec 13 12:58:46.386: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.

and the AP will reboot

please help me

Regards

Javahar R.S.

13 REPLIES
Hall of Fame Super Silver

AIR-LAP1131G not connecting to WLC4402-12

Is the country code correct?  What is the model of your AP and what country do you have set in the WLC?

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

AIR-LAP1131G not connecting to WLC4402-12

On the WLC CLI you can issue:

show country

-Scott
*** Please rate helpful posts ***

AIR-LAP1131G not connecting to WLC4402-12

Your AP is in the M regulatory domain, and a/n radio is not supported in M domain . Your WLC is having a country code which support the a/b radio

Either you will have to change the country code in AP or in the WLC

Thanks

NikhiL

Community Member

AIR-LAP1131G not connecting to WLC4402-12

HI Scott

Country code in the WLC is IN, AP is zero configuration

Hall of Fame Super Silver

AIR-LAP1131G not connecting to WLC4402-12

Look at the model/part number on the AP.  There should be a label on the underside of the AP.  That model has to match the country your putting the AP in.

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: AIR-LAP1131G not connecting to WLC4402-12

The part number should be ex. AIR-LAP1142N-N-K9

You can reference: http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps6087_Products_Data_Sheet.html

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: AIR-LAP1131G not connecting to WLC4402-12

So you need to add KW to the country code list on the WLC.

On the CLI: config country KW

-Scott
*** Please rate helpful posts ***
Community Member

AIR-LAP1131G not connecting to WLC4402-12

AP details :

cisco AIR-LAP1131G-A-K9    (PowerPCElvis) processor with 24566K/8192K bytes of memory.

Processor board ID FTX1353N0G5

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

LWAPP image version 4.1.185.0

1 FastEthernet interface

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:23:33:BC:31:74

Part Number                          : 73-11587-02

PCA Assembly Number                  : 800-30422-01

PCA Revision Number                  : B0

PCB Serial Number                    : FOC12473F8Z

Top Assembly Part Number             : 800-29582-02

Top Assembly Serial Number           : FTX1353N0G5

Top Revision Number                  : A0

Product/Model Number                 : AIR-LAP1131G-A-K9  

WLC Detials :

---------------Show sysinfo---------------

System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 4.1.185.0
RTOS Version..................................... 4.1.185.0
Bootloader Version............................... 3.2.202.0
Build Type....................................... DATA + WPS

System Name...................................... WLC4402-12
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 10.17.36.8
System Up Time................................... 354 days 10 hrs 9 mins 18 secs

Configured Country............................... IN  - India
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +41 C
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 2
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 39

Burned-in MAC Address............................ 00:0B:85:43:04:E0
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK

---------------Show Interface ---------------

Interface Configuration
Interface Name................................... ap-manager
MAC Address...................................... 00:0b:85:43:04:e7
IP Address....................................... 10.17.36.9
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.17.36.1
VLAN............................................. 36
--More-- or (q)uit
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 10.17.36.22
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes

Interface Name................................... guest_wireless
MAC Address...................................... 00:0b:85:43:04:e7
IP Address....................................... 1XX.11.250.30
IP Netmask....................................... 255.255.255.224
IP Gateway....................................... 1XX.11.250.5
VLAN............................................. 250
Quarantine-vlan.................................. no
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No

Interface Name................................... management
MAC Address...................................... 00:0b:85:43:04:e0
IP Address....................................... 10.17.36.8
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.17.36.1
VLAN............................................. 36
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 10.17.36.22
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No

Interface Name................................... service-port
MAC Address...................................... 00:0b:85:43:04:e1
IP Address....................................... 0.0.0.0
DHCP Option 82................................... Disabled
DHCP Protocol.................................... Enabled
AP Manager....................................... No
--More-- or (q)uit

Interface Name................................... tms-wlan1
MAC Address...................................... 00:0b:85:43:04:e7
IP Address....................................... 10.17.37.4
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.17.37.1
VLAN............................................. 37
Quarantine-vlan.................................. no
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 10.17.36.22
Secondary DHCP Server............................ 10.17.36.22
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No

Interface Name................................... virtual
MAC Address...................................... 00:0b:85:43:04:e0
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No


Hall of Fame Super Silver

AIR-LAP1131G not connecting to WLC4402-12

Oh... thats a US access point, so you need to add US to the WLC: config country US

Is it going to be installed in the US?  You really need to make sure so you don't get in trouble or have the military knock on your door.  If you have the wrong AP, talk with your Cisco vendor and have them get you the correct AP.

-Scott
*** Please rate helpful posts ***

AIR-LAP1131G not connecting to WLC4402-12

Is this same AP that you have put in the AP error message, as that says

Mar  1 00:00:05.398: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar  1 00:00:06.798: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar  1 00:00:07.936: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)

Community Member

AIR-LAP1131G not connecting to WLC4402-12

HI scott

can i change the country code US in the WLC, once the  device associate can i change the country code in the AP and WLC. if i  do this way .. will it efect to the network . the WLC wsa purchased 2-3  years back , by default the country code was US and we changed to IN at  the config time.  can i try

regards

Javahar R.S.

Re: AIR-LAP1131G not connecting to WLC4402-12

when you enable a country code you have to disable the A and B networks first then add te country and renewable them. But since the AP is for A you need make sure that you can use the ap in India without violating their regulatory domain.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Hall of Fame Super Silver

Re: AIR-LAP1131G not connecting to WLC4402-12

You will not be able to change the country code of the ap since it is manufactured for a specific country. You will have to purchase a new ap.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
776
Views
0
Helpful
13
Replies
CreatePlease to create content