Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-LAP1141N-A-K9 as a stand alone unit

I recently purchased a AIR-LAP1141N-A-K9. I am going to try it out and see how it works. I know it's not a stand alone ap but what firmware would you recommend loading on it to run it as a stand alone? Also if this works well I am interested in buying a controller and more of these. What controllers are compatible with this unit? I see that the manual says 440x are besides that are there any others?

 

Thank you

 

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Well you should use the last

Well you should use the last one c1140-k9w7-tar.153-3.JAB.tar

http://software.cisco.com/download/release.html?mdfid=282439881&flowid=6789&softwareid=284180979&release=15.3.3-JAB&relind=AVAILABLE&rellifecycle=ED&reltype=latest

**Please rate useful answers**

1 REPLY

Well you should use the last

Well you should use the last one c1140-k9w7-tar.153-3.JAB.tar

http://software.cisco.com/download/release.html?mdfid=282439881&flowid=6789&softwareid=284180979&release=15.3.3-JAB&relind=AVAILABLE&rellifecycle=ED&reltype=latest

**Please rate useful answers**

293
Views
0
Helpful
1
Replies