Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Hi.

I have the next problem.

The AP AIR-LAP1242G-A-K9 does not joining the WiSM2, the AP sends the next message.

Xmodem file system is available.

flashfs[0]: 4 files, 2 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 15998976

flashfs[0]: Bytes used: 2625024

flashfs[0]: Bytes available: 13373952

flashfs[0]: flashfs fsck took 24 seconds.

Base ethernet MAC Address: 64:9e:f3:d9:19:18

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

ethernet link up, 100 mbps, full-duplex

Ethernet port 0 initialized: link is up

Loading "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx"...#################################################################################################################################################################################################################################################################

File "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Mon 02-Nov-09 18:40 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

Initializing flashfs...

flashfs[1]: 4 files, 2 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 15998976

flashfs[1]: Bytes used: 2625024

flashfs[1]: Bytes available: 13373952

flashfs[1]: flashfs fsck took 4 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-LAP1242G-A-K9    (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.

Processor board ID FTX1549B1A0

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

LWAPP image version 3.0.51.0

1 FastEthernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 64:9E:F3:D9:19:18

Part Number                          : 73-11465-01

PCA Assembly Number                  : 800-30492-01

PCA Revision Number                  : A0

PCB Serial Number                    : FOC154707QM

Top Assembly Part Number             : 800-29588-03

Top Assembly Serial Number           : FTX1549B1A0

Top Revision Number                  : A0

Product/Model Number                 : AIR-LAP1242G-A-K9  

% Please define a domain-name first.

Press RETURN to get started!

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Mar  1 00:00:05.378: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log file flash:/event.log

*Mar  1 00:00:05.379: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 0 messages)

*Mar  1 00:00:07.429: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up

*Mar  1 00:00:07.453: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Mon 02-Nov-09 18:40 by prod_rel_team

*Dec  2 04:56:16.974: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec  2 04:56:26.040: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec  2 04:56:35.040: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec  2 04:56:35.041: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec  2 04:56:39.277: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec  2 04:56:54.583: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec  2 04:57:03.584: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec  2 04:57:14.584: %CAPWAP-3-ERRORLOG: Go join a capwap controller

examining image...

*Dec 27 17:15:12.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:15:12.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

*Dec 27 17:15:13.396: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:15:13.397: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:15:13.398: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:15:13.411: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

*Dec 27 17:15:36.714: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:16:01.411: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:16:01.411: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:16:01.412: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:16:01.413: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:16:01.423: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:16:01.429: capwap_image_proc: problem extracting tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:16:10.430: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:16:19.431: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:16:29.431: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Dec 27 17:16:29.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:16:29.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

examining image...

*Dec 27 17:16:30.401: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:16:30.403: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:16:30.403: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:16:30.416: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:17:18.416: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:17:18.416: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:17:18.417: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:17:18.418: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:17:18.424: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:17:18.430: capwap_image_proc: problem extracting tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:17:27.424: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:17:36.425: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:17:46.426: %CAPWAP-3-ERRORLOG: Go join a lwapp controller

*Dec 27 17:17:46.426: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled

examining image...

*Dec 27 17:17:46.438: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN

*Dec 27 17:14:41.225: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening lwapp:/c1240 (Incorrect Login/Password)

archive download: takes 6 seconds

*Dec 27 17:14:47.225: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (IMAGE_DATA) exceeded more than max(1)

*Dec 27 17:14:47.225: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:14:47.225: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:14:47.232: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)

*Dec 27 17:14:47.232: Image could not be downloaded: LWAPP goes back to discovery

*Dec 27 17:14:47.238: lwapp_image_proc: unable to open tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:14:56.231: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:15:05.232: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:15:05.234: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:15:14.240: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:15:15.233: %CAPWAP-3-ERRORLOG: Go join a capwap controller

examining image...

*Dec 27 17:18:22.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:18:22.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

*Dec 27 17:18:23.403: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:18:23.405: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:18:23.405: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:18:23.418: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

*Dec 27 17:18:30.008: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:18:30.008: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:18:30.010: %DTLS-3-BAD_RECORD: Erroneous record received from 155.65.103.253: Duplicate (replayed) record

*Dec 27 17:18:30.011: %CAPWAP-3-ERRORLOG: Invalid event 2 & state 10 combination.

*Dec 27 17:18:30.011: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 10.

*Dec 27 17:18:30.011: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Dec 27 17:18:30.012: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 155.65.103.253

*Dec 27 17:18:40.008: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 10 combination.

*Dec 27 17:18:40.008: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message.

*Dec 27 17:18:40.009: %CAPWAP-3-ERRORLOG: Failed to handle timer message.

*Dec 27 17:18:40.009: %CAPWAP-3-ERRORLOG: Failed to process timer message.

*Dec 27 17:18:40.009: %CAPWAP-3-ERRORLOG: Discovery interval timer expiry handler failed.

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:19:11.418: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:19:11.418: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:19:11.420: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:19:11.426: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:19:11.432: capwap_image_proc: problem extracting tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:20.426: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:19:29.427: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:19:39.427: %CAPWAP-3-ERRORLOG: Go join a lwapp controller

*Dec 27 17:19:39.427: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled

examining image...

*Dec 27 17:19:39.440: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN

*Dec 27 17:18:57.227: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening lwapp:/c1240 (Incorrect Login/Password)

archive download: takes 6 seconds

*Dec 27 17:19:03.227: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (IMAGE_DATA) exceeded more than max(1)

*Dec 27 17:19:03.227: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:19:03.227: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:19:03.234: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)

*Dec 27 17:19:03.234: Image could not be downloaded: LWAPP goes back to discovery

*Dec 27 17:19:03.239: lwapp_image_proc: unable to open tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:12.233: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:21.233: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:19:21.235: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:30.242: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:19:31.235: %CAPWAP-3-ERRORLOG: Go join a capwap controller

examining image...

*Dec 27 17:20:15.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:20:15.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

*Dec 27 17:20:16.392: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:20:16.394: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:20:16.394: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:20:16.407: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

*Dec 27 17:20:23.008: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:20:23.008: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:20:23.010: %DTLS-3-BAD_RECORD: Erroneous record received from 155.65.103.253: Duplicate (replayed) record

*Dec 27 17:20:23.011: %CAPWAP-3-ERRORLOG: Invalid event 2 & state 10 combination.

*Dec 27 17:20:23.011: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 10.

*Dec 27 17:20:23.011: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Dec 27 17:20:23.012: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 155.65.103.253

*Dec 27 17:20:33.008: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 10 combination.

*Dec 27 17:20:33.008: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message.

*Dec 27 17:20:33.009: %CAPWAP-3-ERRORLOG: Failed to handle timer message.

*Dec 27 17:20:33.009: %CAPWAP-3-ERRORLOG: Failed to process timer message.

*Dec 27 17:20:33.009: %CAPWAP-3-ERRORLOG: Discovery interval timer expiry handler failed.

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:21:04.406: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:21:04.406: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:21:04.408: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:21:04.414: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:21:04.421: capwap_image_proc: problem extracting tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:21:13.414: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:21:22.416: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:21:32.416: %CAPWAP-3-ERRORLOG: Go join a lwapp controller

*Dec 27 17:21:32.416: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled

examining image...

*Dec 27 17:21:32.428: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN

*Dec 27 17:18:57.228: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening lwapp:/c1240 (Incorrect Login/Password)

archive download: takes 6 seconds

*Dec 27 17:19:03.228: %LWAPP-3-CLIENTERRORLOG:  Retransmission count for type (IMAGE_DATA) exceeded more than max(1)

*Dec 27 17:19:03.228: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:19:03.228: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:19:03.235: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)

*Dec 27 17:19:03.235: Image could not be downloaded: LWAPP goes back to discovery

*Dec 27 17:19:03.240: lwapp_image_proc: unable to open tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:12.234: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:21.234: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:19:21.236: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:19:30.242: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:19:31.235: %CAPWAP-3-ERRORLOG: Go join a capwap controller

examining image...

*Dec 27 17:22:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:22:07.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

*Dec 27 17:22:08.400: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:22:08.401: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:22:08.401: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:22:08.414: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

*Dec 27 17:22:15.008: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:22:15.008: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:22:15.010: %DTLS-3-BAD_RECORD: Erroneous record received from 155.65.103.253: Duplicate (replayed) record

*Dec 27 17:22:15.011: %CAPWAP-3-ERRORLOG: Invalid event 2 & state 10 combination.

*Dec 27 17:22:15.011: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 10.

*Dec 27 17:22:15.011: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Dec 27 17:22:15.011: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 155.65.103.253

*Dec 27 17:22:15.012: %CAPWAP-3-ERRORLOG: Invalid event 2 & state 10 combination.

*Dec 27 17:22:15.012: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 10.

*Dec 27 17:22:25.009: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 10 combination.

*Dec 27 17:22:25.009: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message.

*Dec 27 17:22:25.009: %CAPWAP-3-ERRORLOG: Failed to handle timer message.

*Dec 27 17:22:25.009: %CAPWAP-3-ERRORLOG: Failed to process timer message.

*Dec 27 17:22:25.009: %CAPWAP-3-ERRORLOG: Discovery interval timer expiry handler failed.

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:22:56.414: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:22:56.414: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:22:56.416: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:22:56.422: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:22:56.428: capwap_image_proc: problem extracting tar file

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Dec 27 17:23:05.429: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

*Dec 27 17:23:14.430: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Dec 27 17:23:24.431: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Dec 27 17:23:25.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:23:25.002: %CAPWAP-5-CHANGED: CAPWAP changed state to 

examining image...

*Dec 27 17:23:26.399: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:23:26.400: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:23:26.401: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:23:26.414: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:24:14.413: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:24:14.413: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:24:14.415: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:24:14.415: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:24:14.419: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:24:14.425: capwap_image_proc: problem extracting tar file

*Dec 27 17:24:14.429: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.

*Dec 27 17:24:24.429: %CAPWAP-3-ERRORLOG: Go join a capwap controller

examining image...

*Dec 27 17:24:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:24:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to 

*Dec 27 17:24:25.400: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:24:25.401: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:24:25.402: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:24:25.414: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

Anyone know what happens?

Thanks!

  • Getting Started with Wireless
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

I'm assuming you meant 7.0.116 as there is not a .166 code out there.

These lines are what interest me:

*Dec 27 17:16:01.423: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:16:01.429: capwap_image_proc: problem extracting tar file

I wouldn't be looking at the AP as problematic, the AP seems to be doing what it should in terms of loading the RCV image. Personally to me this seems like the WLC is sending a corrupt AP image or the transmission is getting corrupted from the get go.

Have you tried loading 7.0.220 onto the WiSM2? This would update the AP images as well.

13 REPLIES

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

How many access points are giving you this problem ? is it just one ? How many are connected to the WLC now ?

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Hi George.

WiSM2 is new, I'm trying with 5 APs of 30 and 5 APs send the same message.

Hall of Fame Super Gold

Re: AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

%Error opening flash:/update/info (No such file or directory)

It's obvious that from the output above you've manage to successfully console into the WAP.  Can you post the output to the command "dir" please?

As George has pointed out, the sub-directory "update" is created when, autonomous or CAPWAP/LWAP image, IOS archive semi-automated script is invoked.  I'm suspecting that an existing "update" folder exist and the WLC is trying to "push" a newer CAPWAP/LWAP IOS across, sees the "update" folder and goes, "Ho, ho, ho.  I'm ain't touching that!" and stops.  This is probably why the WAP isn't being allowed to join by the WLC.

If there is an existing "update" folder then it's easily fixed by deleting the folder using the command "delete /f /r flash:/update" and a reboot of the WAP.

New Member

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Hi Leo.

here is the command dir

MEXMLAP28#dir

Directory of flash:/

    2  -rwx         373   Dec 2 2011 05:02:04 +00:00  env_vars

    3  -rwx           0   Dec 2 2011 05:01:02 +00:00  config.txt

    4  drwx         128   Jan 1 1970 00:02:28 +00:00  c1240-rcvk9w8-mx

15998976 bytes total (13373952 bytes free)

MEXMLAP28#

Hall of Fame Super Gold

Re: AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Ok.  Thanks for the output.

Looks like my theory just went to the dogs ...

I've revisited your output.  Where's the IP Address to your WAP?  How come you have a WAP name but you are running an "RCV" image?

Try this command in enable mode:  clear capwap env

Reboot the WAP and see what happens.

New Member

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Leo the AP is new.


The name and IP, introduced with the following commands.

capwap ap hostname MEXMLAP28

capwap ap ip address 155.65.103.78 255.255.255.0

capwap ap ip default-gateway 155.65.103.1

capwap ap controller ip address 155.65.103.253

Verify

MEXMLAP28#show capwap ip config

LWAPP Static IP Configuration

IP Address         155.65.103.78 

IP netmask         255.255.255.0 

Default Gateway    155.65.103.1  

Primary Controller 155.65.103.253

I tried the command "Clear capwap env" but does not accept the AP.

MEXMLAP28#clear capwap env           

                       ^

% Invalid input detected at '^' marker.

MEXMLAP28#

Hall of Fame Super Gold

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Can the WAP ping the WLC Management IP Address?  If you can, what happens if you try the command "config capwap ap controller ip address "?

New Member

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Yes, tha AP cans ping the WLC Management IP address.

In fact, the AP is registered at WLC, but can not update the version.

*Dec  2 04:57:14.584: %CAPWAP-3-ERRORLOG: Go join a capwap controller

examining image...

*Dec 27 17:15:12.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:15:12.001: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Dec 27 17:15:13.396: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 155.65.103.253 peer_port: 5246

*Dec 27 17:15:13.397: %CAPWAP-5-SENDJOIN: sending Join Request to 155.65.103.253

*Dec 27 17:15:13.398: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/c1240 tar file

*Dec 27 17:15:13.411: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE

*Dec 27 17:15:36.714: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%Error opening flash:/update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

archive download: takes 48 seconds

*Dec 27 17:16:01.411: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST

., 1)

*Dec 27 17:16:01.411: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 155.65.103.253:5246

*Dec 27 17:16:01.412: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:16:01.413: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Dec 27 17:16:01.423: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

*Dec 27 17:16:01.429: capwap_image_proc: problem extracting tar file

Attach the image

Hall of Fame Super Gold

AIR-LAP1242G-A-K9 Not joining to WiSM2 7.0.166.0

Have you tried to reload the WLC?  This is very wierd.

1239
Views
0
Helpful
13
Replies
This widget could not be displayed.