Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Air-P121AG-A-K9 WPA/TKIP

I have installed the above adapter into a desktop unit, I am wanting to use windows instead of the ADU option. but for some reason I do not have the option to use WPA with TKIP for our network, setting it up in the preferred networks list. The antenna sees the AP but will not connect to it either. we have tkip keys that we use and have installed on the PC in the trusted root dir. but winXP will not recognize the WPA protocol.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Air-P121AG-A-K9 WPA/TKIP

XP Service Pack 2 and some patches from Microsoft.com should take care of it.

Try a search on microsoft.com using keywords like "WPA" and / or wireless

Good Luck

Scott

2 REPLIES
Green

Re: Air-P121AG-A-K9 WPA/TKIP

XP Service Pack 2 and some patches from Microsoft.com should take care of it.

Try a search on microsoft.com using keywords like "WPA" and / or wireless

Good Luck

Scott

New Member

Re: Air-P121AG-A-K9 WPA/TKIP

Thanks for the help, I did have all updates for WinXP sp2 but I did try the kb917021 on one test box, it made no difference.... But I did notice that the driver package that came with the pci wireless unit was using ver 2.1 I had downloaded ver 3.0 a couple days earlier for a laptop issue and found that the cisco for the laptop and the pci were the same driver, so I put in the newer driver and it worked first time out. As a Tech I should have known better than to use the factory install disk....;) All is good.

1962
Views
0
Helpful
2
Replies