Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AIR-SAP1602I After convert to LAP, No radio interface

Hello, 

Our AIR-SAP1602I is running ap1g2-k9w7-tar.152-4.JB6.tar and working normally.

Now, we covert AIR-SAP1602I from autonomous to lightweight which is running ap1g2-rcvk9w8-tar.152-4.JB6.tar to join C3850. (It will be joined then not-joined repeatedly)

After converting, we compare AIR-SAP1602I to another AIR-CAP1602I (It's working perfect with C3850 at this present) and find something strange via "show version" and "show capwap client rcb"

Can someone tell us how to solve this problems, thanks !!!

 

AIR-CAP1602I
Last reset from power-on
LWAPP image version 10.1.140.0
1 Gigabit Ethernet interface
2 802.11 Radios

AdminState               :  ADMIN_ENABLED
SwVer                       :  10.1.140.0
NumFilledSlots         :  2

 

AIR-SAP1602I

Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface

------> No show:2 802.11 Radios

AdminState               :  ADMIN_ENABLED
SwVer                       :  7.6.100.0
NumFilledSlots         :  0

 

1 REPLY
VIP Purple

Can you test this with using

Can you test this with using full lightweight image (ap1g2-k9w8-tar.152-4.JB6.tar)  or different recovery image (ap1g2-rcvk9w8-tar.152-4.JB5.tar). to see the problem is persistent.

HTH

Rasika

**** Pls rate all useful responses ***

85
Views
0
Helpful
1
Replies
CreatePlease to create content