Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Aironet 1041 Standalone 5Ghz Band

Hi,

I'm doing a basic install of X8 1041's.

All devices are to be connecting on the 5Ghz band.

The spec of the 1041 states its supports 802.11 a/b/g/n on 2.4Ghz + 5Ghz band.

When configuring the 1041 I only see options relating to the 2.4Ghz band, I see nothing for 5Ghz.

Am I missing something really simple here, how do enable the 5Ghz band?

Any help would be greatly appreciated.

Many thanks,

G

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Aironet 1041 Standalone 5Ghz Band

Check the model you got to see if maybe it a 2.4ghz only. You can also do a show ver to check.

You can reference this data sheet for the part number

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11203/data_sheet_c78-609338.pdf

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

Re: Aironet 1041 Standalone 5Ghz Band

Check the model you got to see if maybe it a 2.4ghz only. You can also do a show ver to check.

You can reference this data sheet for the part number

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11203/data_sheet_c78-609338.pdf

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Gold

Re: Aironet 1041 Standalone 5Ghz Band

The spec of the 1041 states its supports 802.11 a/b/g/n on 2.4Ghz + 5Ghz band.

That's incorrect.  1041 only has one radio.  And it's the 802.11b only.  1042 is the model with both 802.11a and 802.11b radio.

Cisco Aironet 1040 Series Access Points

Table 1.

• AIR-LAP1041N-x-K9: Single-band Controller-based 802.11g/n

Hall of Fame Super Silver

Re: Aironet 1041 Standalone 5Ghz Band

Yeah... I didn't know if it was a fat finger:)

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Re: Aironet 1041 Standalone 5Ghz Band

D@mn! Got the part numbers wrong.

Stupid mistake I made.

Anyway, many thanks Scott.

And I suppose just to be clear for anyone else its is NOT just 802.11b as above.

The 1041's are 802.11g/n, which I have found excellent on a 802.11n 2.4Ghz on previous installs.

The 1042's are 802.11a/g/n and cost considerably more for the priviledge.

2700
Views
0
Helpful
4
Replies
CreatePlease to create content