Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Aironet 1042N & 1041N Upgrade FAIL

Product/Model Number : AIR-AP1042N-A-K9

Product/Model Number : AIR-AP1041N-A-K9

The last firmware c1140-k9w7-tar.152-4.JA1.tar release

#archive download-sw /force-reload tftp://ip-address/c1140-k9w7-tar.152-4.JA1.tar
examining image...
Loading c1140-k9w7-tar.152-4.JA1.tar from (via BVI1): !
extracting info (281 bytes)
Image info:
    Version Suffix: k9w7-.152-4.JA1
    Image Name: c1140-k9w7-mx.152-4.JA1
    Version Directory: c1140-k9w7-mx.152-4.JA1
    Ios Image Size: 11059712
    Total Image Size: 12012032
    Image Feature: WIRELESS LAN
    Image Family: C1140
    Wireless Switch Management Version:
Extracting files...


extracting info.ver (281 bytes)
[OK - 12052480 bytes]

Deleting current version: flash:/c1140-k9w7-mx.124-25d.JA2...done.
New software image installed in flash:/c1140-k9w7-mx.152-4.JA1
Configuring system to use new image...done.
Requested system reload in progress...

after complete process have KERNEL PANIC when client authenticate into de AIRONET, in the two AIRONET !!!

=== Start of Crashinfo Collection (12:19:09 PCTime Tue Oct 22 2013) ===

For image:
Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
Technical Support:
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 23:28 by prod_rel_team

---- Partial decode of process block ----

Pid 159: Process "Dot11 ARP Cache Protocol" stack 0x4B14350  savedsp 0x20BAA2C
Flags: analyze prefers_new
Status     0x00000000 Orig_ra   0x00000000 Routine    0x007DAF14 Signal 0
Caller_pc  0x00000000 Callee_pc 0x00000000 Dbg_events 0x00000000 State  0
Totmalloc  226444     Totfree   139316     Totgetbuf  0      
Totretbuf  0          Edisms    0x0        Eparm 0x0      
Elapsed    0x2        Ncalls    0x32       Ngiveups 0x0      
Priority_q 4          Ticks_5s  0          Cpu_5sec   0        Cpu_1min 0
Cpu_5min   0          Stacksize 0x1770     Lowstack 0x1770   
Ttyptr     0x20925F8  Mem_holding 0x17050    Thrash_count 0
Wakeup_reasons      0x0FFFFFFF  Default_wakeup_reasons 0x0FFFFFFF
Direct_wakeup_major 0x00000000  Direct_wakeup_minor 0x00000000
Regs R14-R31, CR, PC, MSR at last suspend; R3 from proc creation, PC unused:
     R3 : 00000000  R14: 00000000  R15: 00000000  R16: 00000000  R17: 00000000
     R18: 00000000  R19: 00000000  R20: 00000000  R21: 00000000  R22: 00000000
     R23: 00000000  R24: 00000000  R25: 00000000  R26: 00000000  R27: 00000000
     R28: 041480C8  R29: 04AD71BC  R30: 00000000  R31: 00000000  CR: 20000028  -       
     PC : 002AA9C8  MSR: 00029230

And more log of KERNEL PANIC !!!

How can explain this ???

Only can tell that after the upgrade dot11radio0 and 1 in the AIRONET with dual band, shutdown the radios and two machines work fine without errors, but up the radios and authenticate client and KERNEL PANIC again!

Downgrade to c1140-k9w7-mx.124-25d.JA2 and work again !!!

Please if anyone have the same problem, comment!

Everyone's tags (2)

Aironet 1042N & 1041N Upgrade FAIL

Please reach out our TAC , and open a case !!

Aironet 1042N & 1041N Upgrade FAIL

This might be a problem taht will be solved by TAC. Agreed with Saurav

Community Member

Aironet 1042N & 1041N Upgrade FAIL

Abhishek, Saurav what is that mean?

Hall of Fame Super Gold

Aironet 1042N & 1041N Upgrade FAIL


Stay away from autonomous IOS versions  15.X.  Stick with 12.4.

CreatePlease to create content