Hi. I'm testing a basic configuration for access point Aironet 1130 AG.
ap#sh run
Building configuration...
Current configuration : 2169 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret xxx
!
ip subnet-zero
no ip domain lookup
!
!
no aaa new-model
!
dot11 ssid firsttest
authentication open mac-address 701
guest-mode
!
enabledpower inline neg
otiation prestandard source
!
!
username Cisco password xxx
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid firsttest
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
channel 2417
station-role root
no dot11 qos mode
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.201.1 255.255.255.0
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
!
access-list 701 permit 0000.0000.0000 0000.0000.0000
access-list 701 permit 0000.0000.0000 ffff.ffff.ffff
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
!
end
But my laptop can't connect. These are the debug messages
*Mar 1 00:08:10.856: disc_client_add 00c0.49bc.8173, set ST_FWD_PEND
*Mar 1 00:08:10.857: disc_client_add 00c0.49bc.8173, set ST_FWD_PEND
*Mar 1 00:08:10.857: DOT11 EVENT:(adding)client->key_details.encrypt_type is 0
*Mar 1 00:08:10.858: cos 7 maps to q 3
*Mar 1 00:08:12.858: cos 7 maps to q 3
*Mar 1 00:08:14.861: cos 7 maps to q 3
*Mar 1 00:08:14.863: disc_client_add -- enter 0
After a while, the messages change into these:
*Mar 1 00:46:41.575: drop pak: ST_FWD_PEND, rxtype 0x26!= RXTYPE_DOT1X
*Mar 1 00:48:23.805: drop pak: ST_FWD_PEND, rxtype 0x2D!= RXTYPE_DOT1X
The wireless card is US Robotics. The IOS for the access point is 12.3(7)JA
