1. just remenber that the gateway is the device that route the traficc, so in your proxy server you should put a route or a instruction that send all the wireles trafic to the next hope.
2. If you just one to route the internet trafic or port 80 trafic, remember that you should configure in the internet explorer on the pc or laptops clients (tools, internet options, conexions, etc) and configure there the proxy server ip address.
Usually we use the proxy to control the port 80 or internet traficc.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...