Aironet 1131AG WPA Configured. Drops Mac OS X Users
Cisco Aironet 1131AG
I recently changed my authentication type to WPA2. When Mac OS X clients attempt to join the wifi network, they'll be assigned an IP address from my DHCP server, but shortly after, the Aironet will drop them. I've tried giving them a static IP, but then they can't access out network servers.
I have no issues w/ iPhones or Windows based machines. Any ideas?
Ciper - AES CCMP
Open Authentication Checked w/ no additions
Key Management: Mandatory
Enable WPA checked and selected WPA from the drop down
Re: Aironet 1131AG WPA Configured. Drops Mac OS X Users
I have also seen this issue in an LWAPP/CAPWAPP environment, but usually when they have both WPA & WPA2 being used. From the CLI of the AP, can you set the WPA version to 2? You can try this command in the CLI and set it higher than default of 100ms: dot11 wpa handshake timeout
Try setting the Mac OS X users to WPA/TKIP or WPA/AES and see if that works.... if so, then you know that the AP is allowing either and that is your problem.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...