Using an Aironet 1142 in our home and it works fine except that when i for example re-open my macbook air and/or android phone it sometimes has to reconnect to WiFi like 2 or 3 times before it actually is connected correct. I configured the 1140 with:
- One name for both 5Ghz and 2.4Ghz
- Open authentication, WPA enabled, WPAv2
Already tried setting static channels and automatic, also tried to separate two different SSID (one for 2.4, one for 5) but doesnt seem to solve it.
I see this in the logs:
Station xxxx.xxxx.xxxx Authentication failed
That's it. Any idea why this happens a lot of times?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...