Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Aironet 1142: unable to connect to HTTP

Hello,

I try to configure an Aironet 1142 but I have some problems.

The AP gets an IP address from dhcp, but then can not connect to HTTP. The hyperterminal connection is functional, I enter EXEC mode but the CONFIGURE command does not exist.

I tried to connect to the AP with Cisco Configuration Assistant, but also not...

I encounter the same problems with my 8 new AP.

Could someone please help me?

Thanks a lot.

3 REPLIES

Re: Aironet 1142: unable to connect to HTTP

take a look at the model number. Do you Han an AP1142, or do you have a LAP1142? If you have the LAP, you'll want to convert it to IOS.

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPad App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Aironet 1142: unable to connect to HTTP

I have a LAP1142.

Conversion to ios is mandatory to solve my problem?

Thanks.

Re: Aironet 1142: unable to connect to HTTP

if you do not have a WLC, then yes you need to convert it to IOS

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
710
Views
0
Helpful
3
Replies
CreatePlease to create content