Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

aironet 1200 vlan question

I wanted to setup 2 ssids and 2 vlans on my aironets. One encrypted and one open. How do I turn off ssid broadcasting for the encrypted one? And how do I configure 2 vlan support on one poe cable going to the catalyst 4503. Would I assign the port to vlan 1 or 2 on the catalyst? Thanks in advance

New Member

Re: aironet 1200 vlan question

You should make a trunk to the access point.

Create sub interfaces on the ethernet and dot11 radio of the ap.

give all the sub interfaces their separate bridge group id.

create the ssid's with the dot11 [ssid] command and assosiate them with the appropriate vlan.

configure the encryption in one of them.

only set the ssid guest mode to the visible vlan.

Good luck