Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AIRONET 1242AG from wep to WPA2-PSK

Hi, I have several AP, each one of them on a each department of my building.

Each AP is connected to a switch, AP's are using WEP but I want to migrate to WPA2-PSK

I have gone through the following link

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43auth.html#wp1048777

But it's not pretty clear to me.

My questions are:

1-Should I make some changes also on the switches where the AP are connnected to, or should I just swap from WEP to WPA2-PSK?

2- Does anyone has a step by step configuration for WPA2-PSK?

Thanks

2 REPLIES
Silver

Re: AIRONET 1242AG from wep to WPA2-PSK

1) nothing changes upstream from the AP.

2)

dot11 ssid Your_SSID

authentication open

authentication key-management wpa

guest-mode

wpa-psk ascii 0 Your_WPA_Key

interface Dot11Radio0

encryption mode ciphers aes-ccm

ssid Your_SSID

Obviously, delete any wep keys from d0 config.

Community Member

Re: AIRONET 1242AG from wep to WPA2-PSK

Thanks a lot for your help, I really appreciate it.

2466
Views
5
Helpful
2
Replies
CreatePlease to create content