The event logs show the two Aironets associating every 30 seconds. This an INFO message but is this normal to do it so often? We have seen some degrading of the network response over the Aironet and we are looking for possible things to check.
I assume that you have wireless client cards re-associating after every 30 secs to Access points..
To troubleshoot more, try to disable wep (if running means start with the basic config) and see association stays for long time..Also if you are running LEAP, see the session timer for WEP key rotation or so..Increase that time..Tejal
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...