Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Aironet 350 without a hub or switch

I will have to design a wlan for a supermarket. Any idea if I can design a wireless lan without using a hub or switch?

3 REPLIES
Bronze

Re: Aironet 350 without a hub or switch

If you are designing a complete wireless network and you only have a few wireless clients that will be using this connection, then you could set it up without a hub or a switch. If you are setting up a big wireless network then you will have to have a hub or switch in place to support multiple APs so you do not have overlapping traffic.

New Member

Re: Aironet 350 without a hub or switch

Yes, that is what I want to do, I will have around 6-8 wireless clients in the store and totally wireless network. Please give me a tip to configure it on the AP.

New Member

Re: Aironet 350 without a hub or switch

Found the answer while I was playing with it. That is in Ethernet Hardware page. Loss of backbone activity option should be set to "no action". Thanks for help anyway.

174
Views
3
Helpful
3
Replies