Aironet 3602i with autonomous image will not broadcast SSID
I have some Aironet 3602i APs converted from LWAPP to automous mode and I cannot get the SSID's broadcasted. I can confirm that the radios are active and transmitting (I see their MAC addresses on unnamed signals inSSIDer).
I've made an SSID in the Security options, and selected which radio they apply to. Other than that, I'm not sure on most of the other security settings and what I need to get these to work. This is my first configuring an AP of this complexity, and I am probably doing something wrong.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...