02-11-2014 11:30 PM - edited 07-05-2021 12:09 AM
Controller - WISM
AP - 1142
Clients - various apple and computer (802.11n capable)
Hi all,
I have a strange issue in my wireless network whereby all clients are associating to the network on 802.11a and 802.11g only. No clients are using 802.11n when there are capable. Other ap groups on this wism controller are working fine with all clients using a/n or b/g/n but this particular ap group does not seem to work. I've checked the wlan and ap group config/template multiple times and refreshed the template out to the site but appears the every single client is still connecting via a or g.
802.11n is definitely backwards compatible! Does anyone have any idea what this could be and perhaps where I should look for configuration errors?
Many thanks again.
Wil
Solved! Go to Solution.
02-11-2014 11:35 PM
Hi Wilton,
Please check the followings :
1. WLAN is WMM enabled
2. Security must be WPA2+AES or Open
(If you dont meet these 2 requirements you wont be able to push HT rates)
3. 802.11n Rates and support should be enabled on the network (a or b/g)
4. Max data rates without 40 Mhz will be 150 and with 40 Mhz will be 300
5. To verify please issue the command on the AP "show controller d1"
Regards
Dont forget to rate helpful posts
02-11-2014 11:35 PM
Hi Wilton,
Please check the followings :
1. WLAN is WMM enabled
2. Security must be WPA2+AES or Open
(If you dont meet these 2 requirements you wont be able to push HT rates)
3. 802.11n Rates and support should be enabled on the network (a or b/g)
4. Max data rates without 40 Mhz will be 150 and with 40 Mhz will be 300
5. To verify please issue the command on the AP "show controller d1"
Regards
Dont forget to rate helpful posts
02-11-2014 11:56 PM
WMM! that was disabled!
Thanks for the quick responce. I
02-11-2014 11:57 PM
Glad that worked.
Thanks for rating Wilton.
Reagrds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide