Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

All Lwapp Ap's saying duplex mismatch

Hi all

I have a wlc4404 controller and 1242LAG ap's, however they are all coming up with duplex mismatches, the switches are set to auto, why is this happening ?

08-11-2010 13:43:43 Local0.Warning x.x.x.x ST-WLC4404-1: *Aug 11 13:43:14.466: %LWAPP-4-AP_DUPLEX_MISMATCH: spam_api.c:3953 Duplex mismatch discovered on FastEthernet0 (not full duplex), with AP19 FastEthernet0 (full duplex) for AP AP13

Cheers

6 REPLIES
Hall of Fame Super Gold

Re: All Lwapp Ap's saying duplex mismatch

Switches are not 2900XL/3500XL are they?

If they are not, try shut/no shut the interface.

Re: All Lwapp Ap's saying duplex mismatch

I know there was a bug in 6.0.188.0  with WCS that showed the incorrect duplex.

What code are you on ?

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Community Member

Re: All Lwapp Ap's saying duplex mismatch

hi there

I do not have WCS system, these messages are coming from the WLC 4404 controllers

any ideas ?

Community Member

Re: All Lwapp Ap's saying duplex mismatch

Hi Carl

I'd always recommend fixing the 1242 ethernet ports to 100 full. The auto-negotiation process is not exactly foolproof. I've seen these problems so many times that I always fix the ports both on the AP and on the switch.

Regards

Roger

Community Member

Re: All Lwapp Ap's saying duplex mismatch

hi roger

can we do this from the controller, or do I need to console to each individual ap ? or can you enable telnet on each ap ?

cheers

Community Member

Re: All Lwapp Ap's saying duplex mismatch

Hi Carl

Initially I'd just set the switchports to 100M Full and try that. I don't often have to set the APs as well.

If you do need to do the APs you can't batch configure from the controller. You'd have to console to it. If you try and telnet to it to change the settings it probably won't let you as you're changing settings on the connection you're actually on.

Regards

Roger

1541
Views
0
Helpful
6
Replies
CreatePlease to create content