Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Anchor Guest Access and H-REAP

Hi,

I would like to know if it is possible to use H-REAP APs connected via IPSec to the central side and Secure Guest Access?

The anchor controller is installed in the DMZ and the H-REAP APs are installed in branch offices which are connected via VPN. Guest WLAn is configured as Web authentication.

I have read in the design guide that this is not possible. See this:

"Note The IPSec and L2TP Layer 3 security policies are unavailable for WLANs configured with a mobility anchor"

Does anybody have a design running like this?

thanks

Martin

  • Getting Started with Wireless
1 REPLY
Bronze

Re: Anchor Guest Access and H-REAP

it looks like, that you are planing a kind of WAN link between two WLC (whereas remote is action as anchor).

To be honest: This has never been tested; so is not supported.

343
Views
0
Helpful
1
Replies
This widget could not be displayed.