Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Anntenna for Access point 350

How many antennas needed for the 350 series access pioint ( AIR-AP352E2R-A-K9 ) ?

Can we connect the antenna AIR-ANT4941 directly to the aboce access point ?

2 REPLIES
Cisco Employee

Re: Anntenna for Access point 350

You can use one but two you should always have two and are needed for divercity too. Here is the link which discuss about antennas based on features required for Access Points

http://cco/warp/public/cc/pd/witc/ao340ap/prodlit/airoa_ds.htm

Tejal

New Member

Re: Anntenna for Access point 350

The 'need' for diversity is rare, so one antenna is almost always sufficient - especially if you are using something better than the stock 2.2dBi antennas.

If you do use more than one high-gain antenna, make sure they are at least one wavelength apart. (Frequency divided by Speed of Light, about 12cm).

Matthew Wheeler

Chief Wireless Architect

www.BlueModal.com

221
Views
0
Helpful
2
Replies
CreatePlease login to create content