Anyone using Cisco Autonomous 1602e with Intermec CK3X handheld computers?
As the above really....we are seeing issues at a number of clients which we think may be down to some kind of roaming issue....I was just interested if anyone else was using this combination and whether they were experiencing any issues.
IOS version is 15.3(3)JAB which I believe is the latest.
AP Config is attached, I have removed the encryption key as this is a customers system.
The CK3X computers drop of the wireless periodically, they show an icon as if there is no wireless at all. This is happening on a site with approx. 12 CK3X's and occurs about 5-6 times a day to individual CK3X's...it does not happen to all devices concurrently.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...