I have an 1130AG and i can console in and configure anything I need to but I really want to use the web interface. I can hit the web interface and see everything but when I make changes and click "apply" nothing happens on about 90 percent of the pages. Some things I can apply, but the important stuff, like SSID, IP address, encryption, etc.. I can click "apply" all day and nothing will change.
Very frustrated.. >:
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(10b)JA3, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Wed 19-Mar-08 18:08 by prod_rel_team
ROM: Bootstrap program is C1130 boot loader BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
ap uptime is 1 day, 1 hour, 0 minutes System returned to ROM by reload System image file is "flash:/c1130-k9w7-mx.124-10b.JA3/c1130-k9w7-mx.124-10b.JA3"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
If you require further assistance please contact us by sending email to email@example.com.
cisco AIR-AP1131AG-N-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. Processor board ID FTX1124T3UE PowerPCElvis CPU at 262Mhz, revision number 0x0950 Last reset from reload 1 FastEthernet interface 2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:1B:D5:E3:6C:E4 Part Number : 73-8962-12 PCA Assembly Number : 800-24818-11 PCA Revision Number : B0 PCB Serial Number :
Top Assembly Part Number : 800-29230-01 Top Assembly Serial Number :
Top Revision Number : A0 Product/Model Number : AIR-AP1131AG-N-K9
Configuration register is 0xF
ap#dir Directory of flash:/
2 -rwx 143 Mar 1 2002 00:01:17 +00:00 env_vars 3 -rwx 1048 Mar 1 2002 14:13:33 +00:00 private-multiple-fs 156 drwx 320 Mar 8 2002 23:42:01 +00:00 c1130-k9w7-mx.124-10b.JA3 5 -rwx 5 Mar 1 2002 14:13:33 +00:00 private-config
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...