*Apr 07 10:34:17.328: 00:13:60:7c:a1:24 Received a Discover Request from 00:13:60:7C:A1:24 via IP broadcast address but the source IP address (10.1.1.188) is not in any of the configured subnets. Rejecting the
Tue Apr 7 11:21:18 2009: 00:13:60:7c:a1:24 Received a Discover Request from 00:13:60:7C:A1:24 via IP broadcast address but the source IP address (10.1.1.188) is not in any of the configured subnets. Rejecting the request
In regards to the converting 1230 from Autonomous to LWAP and subsequent joining to the WLC, verify if the conversion is successful by going to the controller, Security -> AP Policies and under AP Authorization List you should find the ethernet/base radio MAC address. If it's not there, don't waste your time: The conversion was unsuccessful.
I have had the same issues with 1231 AP. The first problem was error on the AP. Doesn´t try to join the WLC because of local certificate error. It never gives any debug on the WLC. But when converting back to ios and then use the upgrade tool was better, because the upgrade to generates the self signed certificate (older ap than 2006) and fixes the time to the same as the WLC. The second issue was the SCC is not accepted by the WLC. So I had to manually create a MAC entry along with the SCC string output I got from debug pm pki events enable on the WLC. Finally after that the AP joined....
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...