Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP 1242

I have 1242 AP whose IP address is configured as static. I need my clients to associate with the AP, and get IP address assigned by AP. But I didn't find any option where I can put the range for the DHCP. Kindly guide me

Cheers

3 REPLIES
Hall of Fame Super Silver

Re: AP 1242

Configure this:

ip dhcp pool

network x.x.x.x 255.255.255.0

default-router x.x.x.x

ip dhcp excluded-address

http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html#wp1000999

-Scott
*** Please rate helpful posts ***
New Member

Re: AP 1242

It seems that I need to configure the DHCP pool for my clinets on CLI mode. Is there any way to use the GUI mode in order to configure the same on 1242

Cheers

Hall of Fame Super Silver

Re: AP 1242

I'm 99% sure you have to configure DHCP Scope via the CLI. I have never found that option in the GUI.

-Scott
*** Please rate helpful posts ***
180
Views
0
Helpful
3
Replies