Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP 1250 CLI command

What's the command to enable ssid's broad cast.

All I see is GUI examples in the doc's, but no cli examples.

5 REPLIES
Hall of Fame Super Silver

Re: AP 1250 CLI command

Under the SSID configure GUEST-MODE

Here is a link.. hope this helps.

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap7-mbssid.html#wp1017196

-Scott
*** Please rate helpful posts ***
New Member

Re: AP 1250 CLI command

I looked at it; I didn't see any cli commands to enable or disable broadcasting ssid's.

Hall of Fame Super Red

Re: AP 1250 CLI command

Hi Denis,

This command that Scott correctly noted does enable the SSID to be broadcast;

Step 6 guest-mode

(Optional) Designate the SSID as your access point's guest-mode SSID. The access point includes the SSID in its beacon and allows associations from client devices that do not specify an SSID.

Give it a try :) It doesn't mention broadcast but this is what it actually means.

Rob

New Member

Re: AP 1250 CLI command

you're right, it works. Who would of known it.

Hall of Fame Super Red

Re: AP 1250 CLI command

Hi Denis,

They couldn't just say something nice like "enable Broadcast ssid"

It's always something isn't it :)

Take care,

Rob

493
Views
0
Helpful
5
Replies
CreatePlease to create content