I've attached what is been seen with a debug lwapp events enable.
I was seeing the request sometimes with a value of 03 instead of 00, with respect to the discovery method type (IE 58).
As noted, the 1242AG when connected to the network joined the controller instantly. It was on the same switch hwoever.
The 1522 is on a switch down stream, but I can from the port the 1522 is connected to, get an IP from the DHCP server. The DHCP server (diff subnet) shows an active reservation ( i set up reservations for them all).
I can also from this downstream switch get IP's in the vlan for the 1522 and WLAN controller. So I don't think its a lan/switching/vlan issue.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...