Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP 1702i clients can not ping their getway hence other subnets not reachable from clients

Please any one can help resolve this issue

I have an AP 1702i registered on Catalyst 3850 MC, wireless clients are assigned DHCP from the pool that is created on the Catalyst 3850 MC.

They can not ping gateway hence other subnets not reachable from clients.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Pls attach your 3850 config

Pls attach your 3850 config to check

Rasika

4 REPLIES
VIP Purple

Pls attach your 3850 config

Pls attach your 3850 config to check

Rasika

New Member

Please find attached running

Please find attached running configurations on the Catalyst 3850 MC

VIP Purple

Hi,

Hi,

You need to add below configuration lines. Pls test this and let me know

ip dhcp snooping
no ip dhcp snooping information option
ip dhcp snooping vlan
 7

HTH

Rasika

*** Pls rate all useful responses ***

New Member

Finally the wireless clients

Finally the wireless clients were able to ping the gateway and other IP's beyond gateway, though I did not configured the "IP snooping". But in my scenario I also want to authenticate wireless clients via Microsoft Active Directory Server, The web-authentication page is displayed but when user inputs username and password fails.

61
Views
0
Helpful
4
Replies