Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

AP behind the firewall.

i have two network seprated by firewall one side network is with WLC and 2 AP if i want to put 3rd AP in a zone which is behind the firewall what configuration is required and how AP will join WLC.

Thanks

1 REPLY
Cisco Employee

Re: AP behind the firewall.

Hi,

for the AP to learn the WLC ip address you need to give it an option 43 in its dhcp lease :

http://www.cisco.com/en/US/partner/docs/wireless/access_point/1250/installation/guide/125h_f.html

(no need of option 60).

On the firewall, you need to open the capwap ports only : udp 5246 and 5247

Nicolas.

===

Don't forget to rate answers that you find useful.

191
Views
0
Helpful
1
Replies
CreatePlease to create content