Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AP Installation Guidelines

Hi Guys,

Good day!

I will be installing a 2x Wireless AP (1242-AG) in 60m square room, I will install it in both ends of the room. My question is what are the guidelines that I will be considering in situation like this, e.g. channels to be used, % overlaps (to avoid disconnection when user pass to other access point), antennae... etc.

Thanks in advance!

regards,

Gagamboy

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: AP Installation Guidelines

do you mean I do not need to manualy adjust the channel of Wireless AP?

You should be able to get things working without making any adjustment to the channel assignments.

5 REPLIES
Hall of Fame Super Gold

Re: AP Installation Guidelines

I will install it in both ends of the room

  Why?  Do you want wireless coverage OUTSIDE the room too?

channels to be used

You should be fine.  You have two APs so they'll automatically sort themselves out.

New Member

Re: AP Installation Guidelines

Hi Leo,

Thanks for your feedback.

It will only serve inside the room, no need for outside. :-)

As for the channels, do you mean I do not need to manualy adjust the channel of Wireless AP?

Thanks in advance!

regards,

Mark

Hall of Fame Super Gold

Re: AP Installation Guidelines

do you mean I do not need to manualy adjust the channel of Wireless AP?

You should be able to get things working without making any adjustment to the channel assignments.

New Member

Re: AP Installation Guidelines

Thanks Leo!

Hall of Fame Super Gold

Re: AP Installation Guidelines

Thanks for the ratings.

280
Views
0
Helpful
5
Replies
CreatePlease to create content