AP not able join to WLC

[ittechk4u]

Hello,

One of the AP is not joing to 2504WLC.

AP Model:

CAP-3602I-E-K9

The error shows like this "Radius Authorization of the AP has failed"

What Could be the reason?

I check the regulatery domain, country code and compatibilty software but still I am not able to find the root cause.

Any Help will be appreciated.

Thanks

[Sandeep Choudhary · Accepted solution]

Hi

Make sure to check/uncheck AP policies box on WLC.

From WLC GUI > Secuirty > AAA > AP policies, can you verify you have not checked "Authorize MIC APs against auth-list or AAA" ? If checked, uncheck this and try.

On the logs ": RADIUS authorization is pending for the AP  " means that this needs the MAC addr to be in the mac filter or AP Policies.

So, from WLC GUI>>Secuirty>>AAA>AP policies>>Add> ? (AP mac addr) and check if it joins.

Regards

Dont forget to arte helpful posts.

[ittechk4u]

Thanks for reply.

Let me check it.

[Sandeep Choudhary · Accepted solution]

Also check this Document : if you facing Auth. related issues.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml

Regards

[ittechk4u]

Bravo

Perfect Answer sandeep.

Thanks again for such a quick help.

[Sandeep Choudhary · Accepted solution]

Hi,

If u resolved your issue then can you marks this question as answered, it may help others.

Regards

Dont forget to rate helpful posts

[Yogendrasingh56545]

Problem Resolved.

follow these steps to join outdoor AP