Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP not able join to WLC

Hello,

One of the AP is not joing to 2504WLC.

AP Model:

CAP-3602I-E-K9

The error shows like this "Radius Authorization of the AP has failed"

What Could be the reason?

I check the regulatery domain, country code and compatibilty software but still I am not able to find the root cause.

Any Help will be appreciated.

Thanks

3 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

Re: AP not able join to WLC

Hi

Make sure to check/uncheck AP policies box on WLC.

From WLC GUI > Secuirty > AAA > AP policies, can you verify you have not checked "Authorize MIC APs against auth-list or AAA" ? If checked, uncheck this and try.

On the logs ": RADIUS authorization is pending for the AP  " means that this needs the MAC addr to be in the mac filter or AP Policies.

So, from WLC GUI>>Secuirty>>AAA>AP policies>>Add> ? (AP mac addr) and check if it joins.

Regards

Dont forget to arte helpful posts.

VIP Purple

Re: AP not able join to WLC

Also check this Document : if you facing Auth. related issues.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml

Regards

VIP Purple

Re: AP not able join to WLC

Hi,

If u resolved your issue then can you marks this question as answered, it may help others.

Regards

Dont forget to rate helpful posts

5 REPLIES
VIP Purple

Re: AP not able join to WLC

Hi

Make sure to check/uncheck AP policies box on WLC.

From WLC GUI > Secuirty > AAA > AP policies, can you verify you have not checked "Authorize MIC APs against auth-list or AAA" ? If checked, uncheck this and try.

On the logs ": RADIUS authorization is pending for the AP  " means that this needs the MAC addr to be in the mac filter or AP Policies.

So, from WLC GUI>>Secuirty>>AAA>AP policies>>Add> ? (AP mac addr) and check if it joins.

Regards

Dont forget to arte helpful posts.

New Member

Re: AP not able join to WLC

Thanks for reply.

Let me check it.

VIP Purple

Re: AP not able join to WLC

Also check this Document : if you facing Auth. related issues.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml

Regards

New Member

Re: AP not able join to WLC

Bravo

Perfect Answer sandeep.

Thanks again for such a quick help.

VIP Purple

Re: AP not able join to WLC

Hi,

If u resolved your issue then can you marks this question as answered, it may help others.

Regards

Dont forget to rate helpful posts

123
Views
0
Helpful
5
Replies
CreatePlease login to create content