I have our new WiSM installed and setup. WE can access the WiSM with no issues. Latest code is running on the WiSM/AP's. An AP will connect and show up in the WiSM about after about 2-3 mins the ap will disconnect and go back into discovery mode. This results in an endless loop. We have a 4402 installed as well and have had no problems. The errors we see on the WiSM are below:
Thu May 11 10:33:11 2006 [ERROR] spam_lrad.c 1799: AP 00:15:2c:48:4e:a0 associated. Last AP failure was due to Link Failure
Thu May 11 10:32:56 2006 [ERROR] spam_l2.c 677: Max retransmissions reached on AP 00:15:2C:48:4E:A0 (CONFIGURE_COMMAND
, 1)
Thu May 11 10:32:56 2006 Previous message occurred 4 times
Thu May 11 10:27:35 2006 [ERROR] spam_lrad.c 1799: AP 00:15:2c:48:4e:a0 associated. Last AP failure was due to Link Failure
Thu May 11 10:27:17 2006 [ERROR] spam_l2.c 677: Max retransmissions reached on AP 00:15:2C:48:4E:A0 (CONFIGURE_COMMAND
, 2)
