Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP settings - Global Properties

Hi netpro,

let me share with you some background first, currently my AP has 3 Radius server which mainly for redundancy, incase Radius server A down, server B will take over. but, lately i noticed when my Server A , Server B never take over and i saw some logs which indicating Dead Server .... bla bla bla.

anyone can tell me how to configure AP - Global Properties for redundancy.

your reply will be highly appreciated.

thanks.

regards,

Jack

2 REPLIES
Hall of Fame Super Silver

Re: AP settings - Global Properties

Looking at the configuration, the only thing you have to change is to enable the dead radious server list and set it to 1 min which is the minimum. So it would take at least a minute before the ap tries the 2nd radious server. Test it to see how it reacts when server 1 comes back online.

-Scott
*** Please rate helpful posts ***
New Member

Re: AP settings - Global Properties

Hi Fella5,

thanks for your information but i noticed if the Radius server is not down , example : when u do a ping command , radius server still replied with packets although Services down . but the Radius server wont fail over to Radius server B . i have encountered this problem which means i need to manually change the server priority .

is that any solution for this ?

thanks.

regards,

Jack

140
Views
0
Helpful
2
Replies