Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP1141 convert from autonomous to Ligthway

Hi, I have an AP 1141N-A-K9, from autonomous system, with this IOS ( c1140-k9w7-mx.124-21a.JA1), and a WLC 5508 with Version 7.X

I want to convert this AP to ligthway to use with this controller.

I download de Version of IOS (c1140-rcvk9w8-tar.124-21a.JA2.tar) from cisco and the upgrade tool. but when I start the process in the upgrade tool the result is "this version is not supported by the upgrade tool", it pass all the requested information but show this error at the end.

How can I do this change?

Thanks

Gonzalo.

5 REPLIES
Hall of Fame Super Silver

Re: AP1141 convert from autonomous to Ligthway

I was waiting for Leo to post this, but here you go. Dot use the tool.

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Gold

Re: AP1141 convert from autonomous to Ligthway

I was waiting for Leo to post this, but here you go. Dot use the tool.

Good grief Scott.  Give me a break.  I need to sleep!  LOL

Gonzalo,

I agree with Scott. Don't use the upgrade tool.  This method is easier:

1.  Use the archive command to "unpack" the IOS TAR file from your TFTP server to the WAP in question.  The command is:  archive download-sw /overwrite tftp:///IOS.TAR

2.  Reboot

3.  Tah-dah!

Re: AP1141 convert from autonomous to Ligthway

I nominate this link to be posted permanently on the CSC Mobility portal page with Leo's avatar beside it.

Justin

... typd on tny kybrd.

Re: AP1141 convert from autonomous to Ligthway

For the record what guy is a BIG fan of the upgrade tool ...

THIS GUY! (ME)

Just have to know how to use it ... Something Leo hasnt master yet **cough** ... Wins 95 doesnt work with much these days Leo #imjustsaying

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Hall of Fame Super Gold

Re: AP1141 convert from autonomous to Ligthway

Something Leo hasnt master yet **cough**

Wasn't complicated enough. 

THIS GUY! (ME)

Did you put this in your blog yet?

Wins 95 doesnt work with much these days Leo

But my Win 3.1 (16-bit) is still working.

Thanks Justin. 

582
Views
10
Helpful
5
Replies