Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AP1142 cli clear command missing

Hello all,

I'm using a WLC 5508 and light weight 1142 AP's with software version 7.0.116

I  wonder why there is no cli-clear or cli-reload command if I am  connected via SSH/telnet to an access point. When I connect through  console port there are this commands available. Is this a configuration  issue?

Any ideas? Thanks in advance.

Regards,

Robert

Everyone's tags (4)
5 REPLIES
Hall of Fame Super Silver

AP1142 cli clear command missing

I was able to ssh to my 1142 and do a clear and reload command.  Did you make sure you are in enable mode?  I'm running 7.0.220.0, but I don't think that matters.

-Scott
*** Please rate helpful posts ***
New Member

Re: AP1142 cli clear command missing

Hello,

Yes, i've been in enable mode. i will try the new software image.

Regards,

Sent from Cisco Technical Support iPad App

Hall of Fame Super Silver

AP1142 cli clear command missing

Keep us posted if that does indeed fix it.

-Scott
*** Please rate helpful posts ***
New Member

AP1142 cli clear command missing

shame on me

I've worked with the default login and password. After changing it in global config dialog at my WLC, I can see much more commands at the cli prompt.

Hall of Fame Super Silver

Re: AP1142 cli clear command missing

At least you got it working.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
659
Views
0
Helpful
5
Replies