I have looked everywhere that I know to look (Cisco search, Google search, Cisco Software Selector, etc.), and cannot find the "AP1200-Cisco-IOS-Upgrade-Image-v1.img" file. I am starting to feel a little on the stupid side, because I suspect that it is right in front of me... Can someone please point me in the right direction? I have downgraded my AP to 12.01T1 VxWorks from 12.03T already. I just need that upgrade image. Thank you.
That goes straight to it. Thank you. I had already opened a TAC case just to find that little link, but I do appreciate the help. The conversion of the first AP went very well, BTW. I have four more to do in the morning...
I just did our 20 here a few weeks ago. Luckily 10 of them I had not deployed yet. However once I got the hang of things the upgrade on the installed ones went really smooth. I love having AP's now that have the IOS way of doing things. Saving and changing configs just got so much easier....
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...