AP1240 with AIR-ANT2566P4W-R antenna

[EvaldasOu]

Hi guys,

Would you use AIR-ANT2566P4W-R antenna with AP 1240? This AP supports 802.11a/g and has 4 external antenna ports (2ports for 2.4GHz and 2 for 5GHz band).

Ant2566 is for dual-band AP...

For me it looks like not the best practice, but to buy two single band directional antennas is not a cost efficient solution.

[Sandeep Choudhary]

Hi,

If this AP supports dual band ? The 1242AG access point supports a wide range of antennas that you can  connect to the RP-TNC connectors on the 2.4-GHz and 5-GHz radios.

I think you can use this antena(AIR-ANT2566P4W).

Cisco Aironet Antennas and Accessories Reference Guide

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet09186a008008883b.html

For info for 2.4 or 5GHz anteena:

http://www.cisco.com/c/en/us/products/wireless/aironet-antennas-accessories/datasheet-listing.html

Regards

Dont forget to rate helpful posts