Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP1242 unable to telnet or browse - shows amber-red-green continously

Hi,

I had updated the AP to lightweight but half way due to power trip.

Now when bootup, the led keep on shows amber-red-green continously.

The AP grab a dhcp ip but unable to browse or telnet.

Please advise.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: AP1242 unable to telnet or browse - shows amber-red-green co

updated the AP to lightweight but half way due to power trip.

Nope.  The APs on ROMmon.

the led keep on shows amber-red-green continously

Yup.  ROMmon.

Here's how you fix it:

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

And then convert it to LWAP but make sure the power doesn't go either.

Don't forget to rate our useful posts.  Thanks.

3 REPLIES
Cisco Employee

Re: AP1242 unable to telnet or browse - shows amber-red-green co

I think the AP is successfuly converted to LWAPP, If yes we cannot access the LWAPP through the telnet or the browser. Lets try consoling into the device and issue the command "show version" if we see W8 in the image then it means its running the LWAPP image and if we hav the controller, then on the AP CLI issue the command "show lwap client rcb" and check to which controller its associated to.. if not associated, it will in a reload loop..

Hall of Fame Super Gold

Re: AP1242 unable to telnet or browse - shows amber-red-green co

updated the AP to lightweight but half way due to power trip.

Nope.  The APs on ROMmon.

the led keep on shows amber-red-green continously

Yup.  ROMmon.

Here's how you fix it:

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

And then convert it to LWAP but make sure the power doesn't go either.

Don't forget to rate our useful posts.  Thanks.

New Member

Re: AP1242 unable to telnet or browse - shows amber-red-green co

Thank you.

702
Views
0
Helpful
3
Replies