AP1252AG Power Injector - Ethernet Failure Radios still UP
please can somebody help?
I was doing a simple test today with 2 AP's, both AP's are powered by Cisco Power Injectors. I was expecting that my client would simply switch association from one access point to another if I disconnected the ethernet cable of one AP (breaking the network connection). What I noticed was that the Radio's of the AP which has it's ethernet cable unplugged were still authenicating clients. i.e clients were authenticaing with radios of AP which has it ethernet interface down.
Please can somebody tell me whether there is a command that will cause the radios to shutdown in case of ethernet failure, thus forcing clients to try to find another AP
Re: AP1252AG Power Injector - Ethernet Failure Radios still UP
With a power injector, you can't shut the radio down, unless the port that goes from the injector to the ap fails. Then of course the ap will shut down. It is like any access point when the ethernet is down, unplugged, faulty..... radios stay up.