The AP1510 operates with controllers to provide centralized and scalable management, high security, and mobility. Designed to support zero-configuration deployments, the AP1510 easily and securely joins the mesh network and is available to manage and monitor the network through the controller GUI or CLI. The AP1510 is equipped with two simultaneously operating radios: a 2.4-GHz radio used for client access and a 5-GHz radio used for data backhaul to other AP1510s. Wireless LAN client traffic passes through the backhaul radio of the AP or is relayed through other AP1510s until it reaches the controller Ethernet connection.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...