Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AP1522 - cannot PING

Hi,

AP1522 successfully assigned IP address from DHCP server but cannot PING.

I configured DHCP server in 3560 switch,

!

ip dhcp pool AP_test

network 10.50.221.80 255.255.255.240

default-router 10.50.221.81

option 60 ascii "Cisco AP c1520"

option 43 hex f104.0a32.dd52

!

(**I have one 4402 WLC with IP address 10.50.221.82 which maps to 0a32.dd52)

!

Staging1_SW1#sh ip dhcp binding

IP address Client-ID/ Lease expiration Type

Hardware address

10.50.221.88 0100.2450.35dc.00 May 12 1993 07:00 AM Automatic

!

Staging1_SW1#sh cdp ne f0/17 detail

-------------------------

Device ID: MeshAP

Entry address(es):

IP address: 10.50.221.88

Platform: cisco AIR-LAP1522AG-N-K9 , Capabilities: Trans-Bridge

Interface: FastEthernet0/17, Port ID (outgoing port): GigabitEthernet0

Holdtime : 166 sec

Version :

Cisco IOS Software, C1520 Software (C1520-K9W8-M), Version 12.4(18a)JA, RELEASE

SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Fri 21-Nov-08 09:33 by prod_rel_team

advertisement version: 2

Duplex: full

Power drawn: 10.200 Watts

Power request id: 46913, Power management id: 1

Power request levels are:0 0 0 0 0

Management address(es):

!

Advise please,

2 REPLIES
New Member

Re: AP1522 - cannot PING

resolved by adding 1522 MAC address into WLC.

New Member

Re: AP1522 - cannot PING

where did you add the address? into WLC

what version are you running?

i have the same scenario that the 1522 gets an ip address but can ping it from the switch?

204
Views
0
Helpful
2
Replies
CreatePlease login to create content