What is the configuration of cisco ap2602 in order to connect with dsl and enabling standalone dhcp..
My ap ssid is accessible but no internet browing and dhcp is not workin
Sent from Cisco Technical Support iPad App
About your issue, you better go for Aironet IOS configuratoin guide. It is the config guide for autonomouse mode.
Also, there are many configure examples for autonomouse APs in Cisco site.
Check this config guide for example:
Check the config examples right here:
Also check this thread: https://supportforums.cisco.com/thread/2202297
Hope this helps.
If your DSL router/modem provide DHCP then a simple configuration like this on your 2602 should work.
**** Pls rate all useful responses ****
The AP doesn't do NAT, so you need a router to do the NAT. The router would be able to perform DHCP also.
Help out other by using the rating system and marking answered questions as "Answered"
we are using proxy server..we have tmg server from which we are giving dsl to users.
on one dsl i want to connect this ap...
no dhcp is defined in windows server.
configure access point as a DHCP server:
AP# configure terminal
AP(config)# ip dhcp excluded-address 172.16.1.100 172.16.1.xyz
AP(config)# ip dhcp pool test
AP(dhcp-config)# network 172.16.1.0 255.255.255.0
AP(dhcp-config)# lease 10
for more info...paste your topology diagramm.